How to Install Unipost Steel Posts
Installing your Unipost steel posts is straightforward and can be achieved using traditional methods or with the advanced Redi Driver tool for added convenience. Follow the steps below to ensure a secure and durable installation.
1. Prepare the Area
-
Remove any damaged or old posts in the area where you plan to install the Unipost steel posts.
-
Clear any debris or obstacles to ensure a smooth installation process.
2. Choose Your Installation Method
Option A: Standard Installation (Concrete Anchoring)
-
Dig the Holes: Dig a hole 6 inches wide and 30 inches deep for a 6-foot-tall fence. This depth ensures the posts remain stable and secure..
-
Place the Post: Position the Unipost steel post in the hole and ensure it’s upright and aligned.
-
Secure with Concrete: Fill the hole with concrete to anchor the post. Check alignment and adjust if necessary while the concrete is still wet.
-
Allow Concrete to Set: Wait for the concrete to fully cure before attaching the fence panels.
3. Attach the Fence Panels
Once your posts are securely installed, attach the fence panels according to the manufacturer's instructions. Ensure all screws or fasteners are tightened properly.
Option B: Quick Installation with a Redi Driver
If you prefer a faster and more efficient installation, use a Redi Driver to drive the posts directly into the ground. This eliminates the need for digging and concrete.
-
Position the Post: Place the Unipost steel post in the desired location.
-
Use the Redi Driver: Operate the Redi Driver to pound the post into the ground. Keep the post aligned as you drive it to the required depth.
-
Verify Stability: Once driven, ensure the post is secure and upright. Adjust if needed.
Learn more about the Redi Driver and how it simplifies installation by visiting our Post Pounder Page.
How to Build a Gate with Steel Posts with Wood Pickets
This video presents a practical method for constructing a durable gate using steel posts and wooden pickets.
​
The approach emphasizes securely attaching hardware through steel flanges with long self-tapping screws, ensuring a solid and sturdy gate that resists loosening over time.
​
Key tips include hinge placement, latch installation, and reinforcing wooden blocks for additional support.
Gate Construction Overview
The gate is built by mounting wooden pickets to steel posts, using self-tapping screws that penetrate through the wood, steel post wings, and back into the supporting frame. This method improves the gate’s strength and solidity compared to traditional fastening techniques.
-
Attach pickets normally on the gate frame area.
-
Designate one side of the gate opening as the hinge side.
-
Place steel post flanges facing forward on the hinge side; flange direction can be reversed if needed.
-
Add wooden blocks behind the pickets to aid support and conceal hardware from the back view.
Hinge Installation Details
Attaching strap hinges to steel posts requires precise alignment of hinge holes with the steel post wings, allowing screws to go directly through multiple layers.
-
Use 2 ½ inch long self-tapping screws for all fastening through:
-
Hardware (hinge)
-
Wood pickets
-
Steel post wings
-
-
The screws penetrate fully into the 2x4 wooden frame behind the steel post for maximum strength.
-
Align the two main holes on strap hinges to match the steel wing holes exactly, facilitating easy screwing.
-
​
3. Gate Rails and Strap Hinges
The gate frame typically consists of horizontal rails that support the pickets and hardware.
-
Three horizontal rails can be used (top, middle, bottom).
-
For smaller gates, two strap hinges may be sufficient (top and bottom).
-
The middle rail can also be reinforced similarly if desired.
-
Self-tapping screws ensure all hinges are tightly fastened.
Latch Installation and Reinforcement
Securing the latch involves a similar process of drilling and fastening directly into the steel post through wooden backing.
-
Use long self-tapping screws to fasten the latch hardware.
-
Include a wooden block behind the latch to reinforce screw holding power.
-
Screws pass through latch hardware, pickets (or rail), block, flange, and into the post.
-
Result is an exceptionally solid and durable latch that resists loosening.
-
​
Benefits of This Construction Method
-
Superior solidity: Screws penetrate through hardware, wood, and steel, producing a strong, firm gate.
-
No loosening: Self-tapping screws create tight, lasting holds.
-
Concealed fasteners: Wooden blocks hide screw penetration from the gate’s backside for aesthetics.
-
Simple installation: Using standard self-tapping screws and aligning holes avoids need for specialized tools or welds.
-
Versatile: Works with various gate sizes; strap hinge count adjusted according to gate height.
The way your fence is built matters… Our steel posts won’t rot, won’t rust, providing your home with security that lasts a lifetime.
Reliable and Versatile Products
Uniposts are highly versatile and can be used in numerous construction projects. They are made to replace 4×4 wood posts.
Top Quality Materials
Our fencing solutions and sign posts are made from top quality steel that is highly durable and lasts for decades.
Easy to Install
Uniposts come with pre-punched holes that make setup and installation easy, weather driven or installed in concrete.
Competitive Pricing
Whether you choose to use the fencing options for your property or want to become a retailer of quality steel fence posts, all our steel products are competitively priced for your needs.
Years of Experience
We’ve been building fences with steel posts for a long time and our years of experience is shown clearly in the quality of fencing options we offer.
01.
Where can I purchase Unipost steel posts?
You can purchase them from our authorized retailers. Visit our Find a Retailer page to locate a store near you.
02.
Does Unipost offer bulk discounts?
Yes, we provide discounts for bulk orders. Reach out to our customer support team to learn more.
03.
Does Unipost offer shipping?
We can ship full truckloads of Unipost steel posts, ensuring efficient delivery for larger orders. However, due to the weight and length of the posts, shipping smaller orders can be more challenging. Contact us to discuss the best shipping options for your needs.
Purchasing and Shipping
Why Choose UniPost
​Unipost steel posts deliver lasting strength, simple installation, and a sleek look for any fence. Made from durable, fully recyclable steel, they stand up to rot, rust, and harsh weather. We believe in protecting what matters to you. We do that by providing the highest quality products that are easy to use, high wind rated, and have the durability of steel. Everything we do is for the generations to come.
